Water Treatment, Reverse Osmosis Systems, Residential RO Systems Discounted for Veterans
Family and Veteran Owned Business – Discount for Military Residential Customers.
Order Online!
(760) 734-5787
2575 Fortune Way, Suite #A Vista, CA 92081
Water Treatment Systems - Reverse Osmosis Systems - Reverse Osmosis Water Systems
Account
Product has been added to your cart.

Water Store & Water Bottling Units

fill rinse tables
Water Store System by Dimewater

In an era where more and more people are concerned about their water quality, an excellent business to consider is a water store. Consumers who do not have the resources to purchase full treatment for their home, who are renters or who are environmentally alert about plastic bottles are all prospective customers for purchasing water to take home or to their office.

 

 

 

 

water vending machine
Water Vending Machine by Dimewater

Water store and water bottling water treatment are similar with bottling equipment normally designed to produce significantly more water, operate in a more industrial setting and perform under more stringent regulations. Pretreatment, water purification and post treatment are all provided by Dime Water, Inc. and are meticulously designed and produced to match source water, finished water, available power, and output volume to the bottlers needs. Materials of construction are selected to comply with codes and control systems designed for energy efficiency. There are no size limitations  – small or large and bottling machine interface controls are available.

All of our water stores are built to your water chemistry with particular attention paid to the treated water quality, long-term reliability and simplicity of operation. Systems are designed to fit through standard doorways and are on wheels to facilitate placement, floor cleaning and installation.
Water Store Reverse Osmosis Systems are fully assembled and tested prior to shipment. Shipped in as-run position for immediate production after simple installation

  • They all include:
  • MaxicureTM or AquaferTM non-chemical, zero maintenance pre-treatment
  • 5 micron and activated carbon pre-treatment
  • Reliable microprocessor control system. Hands off operation
  • High efficiency pressure booster pump
  • Stainless steel membrane housings and low energy membranes
  • Fully automatic control system for reliable operation
  • Product Water TDS meter
  • 300 gallon storage tank with all level controls built in
  • Re-pressurization pump. Stainless steel
  • Totalizing meter to monitor sales
  • Ultraviolet light post treatment for ultimate protection

As a basic manufacturer, we can produce systems of different physical size, different product volume and custom filtration methods upon request.

Available options are:

  • Ozone system with tank re circulation. Timer controlled
  • Window Vending unit with bill changer and UV
  • PLC controller
  • Export crating

Dispensing Systems:

All are constructed of stainless steel and polypropylene for a great sanitary look and service life and include added ozone at fill.

  • 4 Station (2 fill and 2 rinse) 30″ x 60″ x 50″ High
  • 6 Station (4 fill and 2 rinse) 30″ x 72″ x 50″ High
  • 2 Station Rinse only – 30″ x 34″ x 50″ High
  • Station Rinse only – 30″ x 60″ x 50″ High
  • Station Rinse only – 30″ x 72″ x 50″ High

Storage tanks 100 to 1000 gallons:

MODEL NUMBER GALLONS/DAY L X W X H In. See note #1
WS-500 500 48 X 24 X 65
WS-1000 100 48 X 24 X 65
WS-2000 2000 48 X 24 X 65
WS-3000 3000 48 X 24 X 65
WS-6000 6000 48 X 33 X 65
WS-9000 9000 48 X 33 X 65
WS-12000 12000 48 X 33 X 65
WS-15000 15000 48 X 33 X 65

Note#1: Does not include storage tank. Standard 300 Gal. tank measures 35″ Dia. and is 82″ high. FDA approved polyethylene.

MEMBRANES

RO membranes are the essential core process of water stores. By maintaining the pretreatment the membrane life can often exceed 3-5 years before replacement or cleaning is required. If replacing be sure to work with Dime Water, Inc. to obtain the membrane designed for your system.

Call to purchase Membranes: 760.734.5787

FILTER MEDIA

Most systems are designed and constructed using media with extended life. When replacement becomes necessary rely on Dime Water,inc. to get the correct material to you on a timely basis.

Call to purchase Filter Media: 760.734.5787

REPLACEMENT CARTRIDGES

Cartridges are vital to the long term operation of your water store and were selected based on the store’s water chemistry. Replacement in accordance with instructions guarantees long term system operation.

Call to purchase Replacement Cartridges: 760.734.5787

A water treatment system service and maintenance plan is an economical interference-free manner in order to ensure that the water treatment system is operating at the desired performance. Our approach is – on a local basis including much of southern California – to use contractors’ help. More often than not, we are able to provide a plumber or a licensed technician that will work on our behalf to get the equipment repaired. We are available from 8am-5pm, Monday to Friday to answer all your questions!

Dime Water, Inc. provides pre- and post treatment instructions with every system at the time of the shipment. Our staffed engineers will be in touch with you to answer all your questions about pre- or post treatment. If you have any questions, call and talk to our water treatment experts.

FREQUENTLY ASKED QUESTIONS

A: Yes.

A: Most people and many of the licensing agencies say that if the total dissolved solids are 10 mg /liter that can be advertised as pure water. Anywhere from 10mg/l up to 20-30 mg/l would be acceptable from a drinking water standpoint.

A: We, at Dime Water, Inc. prefer the foot paddle approach, where you just put a foot paddle that is going to turn the water on when you are standing on it and turns it off when you release it and we do that just to have a minimal amount of hand contact with the various components of the fill table.

A: The drain is a function of where you going to face the unit. If you are lucky and the facility was designed for this application that would just be a gravity drain going into the sanitary sewer.

A: Yes, we size the pump to the number of fill-stations and anticipated number that are going to be operating.

A: We build semi-automatic systems starting with one or two stations and up to 12.

A: Depends on the size of the bottle but we try to give flow in the neighborhood of 2 to 3 gallons a minute at each faucet.

A: Stainless steel, polypropylene, the piping is polyethylene or PVC all NSF approved.

READY TO DISCUSS YOUR WATER SYSTEM OPTIONS?

AT THE LOWEST AVAILABLE PRICE?

CONTACT US
This website uses cookies to improve your experience. If you continue to use this site, you agree with it.